Pregled bibliografske jedinice broj: 211445
B2O3 and CaO in magnesium oxide from seawater
B2O3 and CaO in magnesium oxide from seawater // Materiali in tehnologije, 40 (2006), 2; 65-68 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 211445 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
B2O3 and CaO in magnesium oxide from seawater
Autori
Martinac, Vanja ; Labor, Miroslav ; Petric, Nedjeljka
Izvornik
Materiali in tehnologije (1580-2949) 40
(2006), 2;
65-68
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
substoichiometric precipitation; B2O3 content; rinsing agent; magnesium oxide from seawater
Sažetak
We have examined the effect of distilled water with a pH of 12.50 during the rinsing of a precipitate of magnesium hydroxide, obtained from seawater by substoichiometric precipitation with 80% of the stoichiometric quantity of dolomite lime as the precipitation reagent. However, with this precipitation method the content of B2O3 in the product increases, i.e. magnesium oxide obtained from seawater. The purpose of this study was not only to reduce the B2O3 quantity as much as possible, but also to determine the minimum number of rinses needed to obtain calcined magnesium oxide with a satisfactory quality. Specifically, boron causes significant disturbances in the electrolysis of magnesium chloride used to obtain metal magnesium if magnesium chloride obtained from seawater is used as the cell charge, and it also adversely affects the quality of the refractory material produced from the sintered magnesium oxide obtained from seawater. The results indicate that if this method of rinsing the magnesium hydroxide precipitate is used, the B2O3 content in MgO samples (80% precipitation) is 0.069 mass %, which is 66% less than the B2O3 content in samples prepared without rinsing the magnesium hydroxide with alkalized distilled water (B2O3 = 0.200 mass %). We found that it is sufficient to carry out the rinsing by decantation three times, as further rinsing does not cause a further reduction in the amount of B2O3 in the sample. This rinsing method does not change the CaO content in calcined magnesium oxide, which indicates that further rinsing should be done with non-alkalized distilled water.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo
Citiraj ovu publikaciju:
Uključenost u ostale bibliografske baze podataka::
- Chemical Abstracts
- Engineered Materials Abstracts
- Civil Engineering Abstracts