Pregled bibliografske jedinice broj: 210938
Analysis of Interface at Explosive Welded Plates from Low-Carbon Steel and Titanium
Analysis of Interface at Explosive Welded Plates from Low-Carbon Steel and Titanium // Sažeci predavanja s 6. međunarodnog simpozija hrvatskih metalurga / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2004. str. 227-239 (poster, nije recenziran, sažetak, znanstveni)
CROSBI ID: 210938 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of Interface at Explosive Welded Plates from Low-Carbon Steel and Titanium
Autori
Kosec, Borut ; Kosec, Ladislav ; Fajfar, Peter ; Čevnik, Gorazd ; Gojić, Mirko ; Anžel, Ivan
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Sažeci predavanja s 6. međunarodnog simpozija hrvatskih metalurga
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2004, 227-239
Skup
6. međunarodni simpozij hrvatskih metalurga
Mjesto i datum
Šibenik, Hrvatska, 20.06.2004. - 24.06.2004
Vrsta sudjelovanja
Poster
Vrsta recenzije
Nije recenziran
Ključne riječi
explosive welding; impurities; low-carbon steel; titanium; structure
Sažetak
On the basis of experimentally obtained data, it was established that a very thin layer of a melt is generated at the explosive welding of two metals at the bond interface within which impurities flow at the bond during melting. Rapid cooling after the collision generates an alloy of different structure and very small grains of an average thickness approximately 1 to 2 mm. The generation of such an amorphous layer in the bond area has been noticed with various metal combinations and represents a fundamental mechanism of explosive welding of metals. Using the metallographic analysis, the development of the vortices which were formed by the explosive welding of low-carbon steel and titanium plates is described in the paper.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
