Pregled bibliografske jedinice broj: 210903
Manufacturing of Metal Composite Materials with High Rate Energy Concentration Method
Manufacturing of Metal Composite Materials with High Rate Energy Concentration Method // Sažeci predavanja s 6. međunarodnog simpozija hrvatskih metalurga / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2004. str. 207-221 (poster, nije recenziran, sažetak, znanstveni)
CROSBI ID: 210903 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Manufacturing of Metal Composite Materials with High Rate Energy Concentration Method
Autori
Kosec, Ladislav ; Petrović, Slavko ; Kosec, Borut ; Gojić, Mirko ; Škraba, Polona
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Sažeci predavanja s 6. međunarodnog simpozija hrvatskih metalurga
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2004, 207-221
Skup
6. međunarodni simpozij hrvatskih metalurga
Mjesto i datum
Šibenik, Hrvatska, 20.06.2004. - 24.06.2004
Vrsta sudjelovanja
Poster
Vrsta recenzije
Nije recenziran
Ključne riječi
composite materials; collision parameters; mathematical modelling; microstructure; macrostructure
Sažetak
The manufacturing of metal composite materials with high rate energy concentration method bases on ultra high speed collision of metal plates to be bonded. Proper control of collision parameters ensures successful process development and hence good bond quality. Direct collision pressure measurements is very difficult because of high pressure levels (which could reach several hundred kbars) and its short duration (only 0, 001 second or less). By means of experimental work and mathematical modelling, good bond quality is achievable. It is controlled by non-destructive and mechanical testing methods, and by micro and macrostructure investigations.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
