Pregled bibliografske jedinice broj: 209039
Effect of Load Distribution along Facewidth on Tooth-Root Stress
Effect of Load Distribution along Facewidth on Tooth-Root Stress // Proceeding of 9th International Research/Expert Conference " Trends and the Development of Machinery and Associated Technology" TMT 2005 / Ekinović, Sabahudin ; Yalcin, Senay ; Calvet, Juan Vivancos (ur.).
Zenica: Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istambul, Muhendislik Fakultesi ; Escola Tecnica Superior D`Enginyeria Industrial de Barcelona, Department d`Engineyeria Mechanica, Universitat Politecnica de Catalunya, 2005. str. 893-896 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 209039 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Effect of Load Distribution along Facewidth on Tooth-Root Stress
Autori
Marunić, Gordana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceeding of 9th International Research/Expert Conference " Trends and the Development of Machinery and Associated Technology" TMT 2005
/ Ekinović, Sabahudin ; Yalcin, Senay ; Calvet, Juan Vivancos - Zenica : Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istambul, Muhendislik Fakultesi ; Escola Tecnica Superior D`Enginyeria Industrial de Barcelona, Department d`Engineyeria Mechanica, Universitat Politecnica de Catalunya, 2005, 893-896
Skup
9th International Research/Expert Conference " Trends and the Development of Machinery and Associated Technology" TMT 2005
Mjesto i datum
Antalya, Turska, 26.09.2005. - 30.09.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Thin-Rimmed Gear; Load Distribution; Facewidth; Face Load Factor
Sažetak
The paper deals with the effect of non-uniform load distribution along spur tooth facewidth, upon a tooth-root stress field of thin-rimmed gear. The different linear load distribution, from constant load to triangular shape, is simulated by the boundary conditions imposed to the developed 3D FEM single gear models. The combined influence of a gear rim thickness and the facewidth upon the tooth-root stress distribution is investigated. Based upon the established tooth-root stress distribution of thin-rimmed gear, the ratio between maximum tooth-root stress for certain load distribution, and mean tooth-root stress along the facewidth for constant load distribution, is estimated. This ratio corresponds to the face load factor of the standard ISO, proposed for the gears with a minimum rim thickness of sR>3, 5m.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
