Pregled bibliografske jedinice broj: 208154
THE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES
THE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES // Proceedings / 9th International Research/Expert Conference “ ; ; Trends in the Development of Machinery and Associated Technology” ; ; ; TMT 2005, ISBN 9958-617-28-5 / Dr. Sabahudin Ekinović, dr. Senay Yalcin, dr. Joan Vivancos Calvet (ur.).
Antalya: Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, etc., 2005. str. 1029-1032 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 208154 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
THE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES
Autori
Vnučec, Zdravko ; Kljajin, Milan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings / 9th International Research/Expert Conference “ ; ; Trends in the Development of Machinery and Associated Technology” ; ; ; TMT 2005, ISBN 9958-617-28-5
/ Dr. Sabahudin Ekinović, dr. Senay Yalcin, dr. Joan Vivancos Calvet - Antalya : Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, etc., 2005, 1029-1032
Skup
9th International Research/Expert Conference “ ; ; ; Trends in the Development of Machinery and Associated Technology” ; ; ; TMT 2005
Mjesto i datum
Antalya, Turska, 26.09.2005. - 30.09.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
failure; stress concentration; laminated composite structure
Sažetak
In this paper, applications of theoretical, numerical (FEM) and experimental methods to investigation of fracture of laminated composite plane structures with hole are described. The ultimate loading capacities until fracture for the strips with central holes made from laminated composite material are obtained. Especially attention is gives to the stress distribution in the region beside the point of initiated crack on contour of holes in structure. Results of numerical (FEM) and experimental stress analysis (photoelastic method) in plane structures with holes subjected to uniaxial loading are presented in tables and graphically in figures and photos.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
Napomena
COBISS.BH-ID 14361094
