Pregled bibliografske jedinice broj: 207213
Lubricants for the rolling and drawing of metals
Lubricants for the rolling and drawing of metals // Materiali in tehnologije, 39 (2005), 3; 61-75 (međunarodna recenzija, pregledni rad, znanstveni)
CROSBI ID: 207213 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Lubricants for the rolling and drawing of metals
Autori
Ćurčija, Dušan ; Mamuzić, Ilija
Izvornik
Materiali in tehnologije (1580-2949) 39
(2005), 3;
61-75
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, pregledni rad, znanstveni
Ključne riječi
lubricants ; emulsions ; suspensions ; Reynolds equations ; lubricants toxicity ; surface roughness
Sažetak
A survey is given over lubricants for rolling and drawing of metals. Emulsions, suspensions, natural fats and oils and synthetic lubricants are presented. Fluid mechanics Reynolds equations are used for the calculation of the lubricant layer in the entering section of the metals deformation zone. Colloide chemistry is used for the analysis of surface active additions on lubricant properties, lubricant layer thickness and the wetting angle. Lubricants for hot rolling based on suspensions and glass are presented also. Special attention is given to the removing of lubricant from the surface after processing, to measures for the protection of workers and to ecological problems of used lubricants.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Citiraj ovu publikaciju:
Uključenost u ostale bibliografske baze podataka::
- Chemical Abstracts
- Metals Abstract
- Metadex
- Geobase
- Chemical Abstracts
- Mechanical Engineering Abstracts
