Pregled bibliografske jedinice broj: 204541
A Slipway Structure for River Ship Repair
A Slipway Structure for River Ship Repair // Proceedings of the Ninth International Symposium on WATER MANAGEMENT and HYDRAULIC ENGINEERING / Nachtnebel, H. P. (ur.).
Ottenstein: The University of Natural Resources and Life Sciences, Vienna (BOKU), 2005. str. 247-254 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 204541 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
A Slipway Structure for River Ship Repair
Autori
Sorić, Zorislav ; Vugrinec, Radovan ; Kvasnička, Predrag ; Kišiček, Tomislav ; Galić, Josip ; Matešić, Leo
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
Proceedings of the Ninth International Symposium on WATER MANAGEMENT and HYDRAULIC ENGINEERING
/ Nachtnebel, H. P. - Ottenstein : The University of Natural Resources and Life Sciences, Vienna (BOKU), 2005, 247-254
Skup
Ninth International Symposium on WATER MANAGEMENT and HYDRAULIC ENGINEERING
Mjesto i datum
Ottenstein, Austrija, 04.09.2005. - 07.09.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
slipway; reinforced concrete; piles and girders; foundation soil; ships on inclined rail system
Sažetak
A slipway structure for ship repair discussed in this paper has been designed and constructed on the River Sava near the town of Sisak in Croatia. The structure consists of reinforced concrete bored piles and girders. In the river, girders are supported by a trapezoidal concrete block of 16x2 m placed in the river bed. From this block up, girders of 2x2 m in cross-section are inclined from the river to a certain bank height after which they are horizontal. For the predicted loads foundation soil was too weak, and for this reason each girder rests on 9 piles from 3 to 12 m in length and 1.0 m in diameter. The joint between the girder and piles is rigid, and thus they make a frame element. There are 11 girders, whose inclined and horizontal parts have a length of 41 m and 26 m respectively. The whole structure covers an area of 82x86 m. Ships are to be supported by trolleys travelling on an inclined rail system. The structure extends underwater for a sufficient distance to enable the ships to float on and off. The movement of trolleys together with a ship is controlled by hauling winches that are situated at the upper end of the slipway.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Projekti:
0082203
Ustanove:
Građevinski fakultet, Zagreb
Profili:
Leo Matešić
(autor)
Josip Galić
(autor)
Zorislav Sorić
(autor)
Tomislav Kišiček
(autor)
Predrag Kvasnička
(autor)