Naslov
Proposal for the value of permitted tolerance on width of grooved rails

Autori
Lakušić, Stjepan ; Rukavina, Tatjana ; Dragčević, Vesna

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
COMPUTER IN RAILWAYS VIII / Allan, J. ; Hill, R.J. ; Brebbia, C.A. ; Sciutto, G. ; Sone, S. - Southampton : Boston (MA) : Wessex Institute of Technology Press, 2002, 605-612

Skup
COMPRAIL 2002

Mjesto i datum
Lemnos, Grčka, 12.06.2002. - 14.06.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
tram track; grooved rails type Ri60/R10; rails geometry; guide width of grooved rails

Sažetak
This paper describes a research in geometry of grooved rails (type Ri 60/R10). The research was carried out in the last seven years (from 1994 to 2001). The measuring of rails geometry was done before building-in of the rails in to the tramway track or during the supervision grooved rails of production in the factory. Special attention was given to the width guide of grooved rails because the technical specifications for grooved rails (VDV OBERBAU Richtlinien) have not defined permitted tolerance for a guide width of grooved rails. Therefore, some difficulties arise from this fact, during production and supervision of grooved rails in the factory. The results of research can serve as a recommendation for the value of permitted tolerance of the guide width of grooved rails. The results can also be applied as a proposal in the setting of European Standard for grooved rails.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo

POVEZANOST RADA