Pregled bibliografske jedinice broj: 203082
A 10-bit Successive Approximation Analog-to-Digital Converter
A 10-bit Successive Approximation Analog-to-Digital Converter // 28th International Convention MIPRO 2005 : Conferences Microelectronics, Electronics and Electronic Technologies (MEET) and Hypermedia and Grid Systems (HGS) : proceedings / Biljanović, Petar ; Skala, Karolj (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2005. str. 113-116 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 203082 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
A 10-bit Successive Approximation Analog-to-Digital Converter
Autori
Ivanuš, Krešimir ; Butković, Željko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
28th International Convention MIPRO 2005 : Conferences Microelectronics, Electronics and Electronic Technologies (MEET) and Hypermedia and Grid Systems (HGS) : proceedings
/ Biljanović, Petar ; Skala, Karolj - Rijeka : Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2005, 113-116
ISBN
9532330119
Skup
Conference Microelectronics, Electronics and Electronic Technologies ; Hypermedia and Grid Systems
Mjesto i datum
Opatija, Hrvatska, 30.05.2005. - 03.06.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
analog-to-digital converter; CMOS technology; digital-to-analog converter; comparator
Sažetak
A 10-bit successive approximation analog-to-digital converter is presented. All circuits necessary for the operation of the converter are designed in a 0.18um CMOS technology. In the logical part of the converter special attention is paid to the design of single clock flip-flop. A R-2R network architecture is used in digital-to-analog converter implementation. A comparator with rail-to-rail common mode range is used to provide the conversion of the analog voltage ranging from 0 to the supply voltage. The converter is designed for 1.8V power supply, the total power consumption of the converter is about 500 uW, and the resolution of 10 bits is achieved at 2MSamples/s.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
