Pregled bibliografske jedinice broj: 198051
The Influence of Surface Roughness on Load Bearing Capacity of Adhesive Joints
The Influence of Surface Roughness on Load Bearing Capacity of Adhesive Joints // Proceedings of the 10th Internatonal Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2005. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 198051 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Influence of Surface Roughness on Load Bearing Capacity of Adhesive Joints
Autori
Raos, Pero ; Stoić, Antun ; Lucić, Mirjana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 10th Internatonal Scientific Conference on Production Engineering
/ Cebalo, Roko ; Schulz, Herbert - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2005
Skup
Computer Integrated Manufacturing and High Speed Machining CIM 2005
Mjesto i datum
Korčula, Hrvatska; Lumbarda, Hrvatska, 15.06.2005. - 17.06.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
surface roughness; adhesive bonding; single-lap joints
Sažetak
Experimental results on the effect of surface roughness on the adhesive joint strength have been presented in this paper. Mechanical properties of single lap adhesive joints with different surface roughness were tested and examined. Testing joints were made using two types of adherends: aluminium and stainless steel ; and one type of adhesive: two component high-strength engineering adhesive. Good correlation was found between the theoretical knowledge and experimental results. It was also found that treating surfaces of soft materials like aluminium are significant different than treating materials like stainless steel, by means of surface roughness, because higher roughness diverse range could be reached.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
