Naslov
Arc welding of steel pipe connections on steel gas pipeline in service

Autori
Samardžić, Ivan ; Dunđer, Marko ; Kolumbić, Zvonimir

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni

Izvornik
10th International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (CIM 2005) : proceedings / Cebalo, Roko ; Schulz, Herbert - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2005, V-17

Skup
International Scientific Conference on Production Engineering (10 ; 2005)

Mjesto i datum
Lumbarda, Hrvatska, 15.06.2005. - 17.06.2005

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
arc welding; gas pipeline; natural gas

Sažetak
The paper presents an installing procedure (welding/drilling) of the steel tapping tees to the steel gas distribution network, without interruption of the consumer supplies. The steel tapping tee for welding/drilling installation procedure is standardized steel fitting, which is installed between steel gas distribution networks and the connected steel gas pipeline. Two types of steel tapping tees were described. After welding the fitting, the pipeline of the gas distribution network will have to be drilled. Welding/drilling procedure described in the paper is used for branching of the steel gas distribution networks as well as for connecting of the new consumer on the existing network. The practical experience has shown that the described procedure attains high-quality connection. The procedure is safe, reliable, economical and ecological.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA