Pregled bibliografske jedinice broj: 189652
Electrical properties of thin films Zn/(PEO)4ZnCl2/XOy, SnO2 X=Mn, Ti, Zn ; y=1, 2) galvanic cells
Electrical properties of thin films Zn/(PEO)4ZnCl2/XOy, SnO2 X=Mn, Ti, Zn ; y=1, 2) galvanic cells // Solid state ionics, 70-71 (1994), 1; 642-646 doi:10.1016/0167-2738(94)90386-7 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 189652 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Electrical properties of thin films Zn/(PEO)4ZnCl2/XOy, SnO2 X=Mn, Ti, Zn ; y=1, 2) galvanic cells
Autori
Turković, Aleksandra ; Šokčević, Damir ; Šipuš, Zvonimir
Izvornik
Solid state ionics (0167-2738) 70-71
(1994), 1;
642-646
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Galvanic cell ; IS ; thin film ; polymer electrolyte ;
(Galvanic cell ; IS ; thin film ; polymer electrolyte)
Sažetak
Galbvanic cells Zn/(PEO4ZnCl2/XOy, SnO2 (X=Mn, Ti, Zn ; y=1, 2) have been formed by chemical vapour deposition, electrodeposition and spray method of TiO2, SnO2 ; MnO2 and ZnO thin films, respectively, onto glass plate. Polymer electrolyte foil (PEO)4ZnCl2 has been placed on the top of TiO2, SnO2 ; MnO2, SnO2 or ZnO, SnO2 double thin films. Zn plate anode has been spring-contacted on top of these layers. Charge-discharge cycles were measured with a constant current in the range of 1 microA to 10 mA for different cells. The maximum of constant current has changed depending on the oxide intercalation cathode or the number of polymer electrolyte layers placed in between electrodes. The complex impedance measurements of polymer electrolyte have been performed in the range of 10 Hz to 500 kHz applying Zn electrodes.
Izvorni jezik
Engleski
Znanstvena područja
Fizika
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
