Naslov
Bending of refined MDF boards

Autori
Medved, Sergej ; Jambreković, Vladimir

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Wood - Future material in Furniture Design / Grbac, Ivica - Zagreb : Šumarski fakultet Sveučilišta u Zagrebu, 2001, 61-66

Skup
Wood - Future material in Furniture Design

Mjesto i datum
Zagreb, Hrvatska, 19.10.2001

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
MDF boards; grinding; refinement; profile thickness; bending

Sažetak
The article discusses the influence of grinding, depth of grinding and surface refinement on the stability of MDF boards. In the experiment discussed, the commercial MDF boards of 25-mm thickness and of 100 x 500 mm size were used. Some MDF board samples were ground at one side only, while some were ground at both sides. The depth of grinding was 0, 8 and 15 mm. Decorative laminates of 0, 2 mm were used for surface refinement. The samples were refined at both sides. Substantial bending was observed on the boards ground on one side only. These boards see an increase in bending proportional to an increase in the depth of grinding. When refined, the boards get an increase in bending to a greater extent.

Izvorni jezik
Engleski

Znanstvena područja
Biotehnologija

POVEZANOST RADA