Pregled bibliografske jedinice broj: 181375
Possible ways of taking over perpendicular stresses
Possible ways of taking over perpendicular stresses // Proceedings of the 8th WCTE 2004 / Alpo Ranta-Maunus (ur.).
Helsinki: VTT Technical Research Centre of Finland, 2004. str. 373-376 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 181375 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Possible ways of taking over perpendicular stresses
Autori
Haiman, Miljenko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 8th WCTE 2004
/ Alpo Ranta-Maunus - Helsinki : VTT Technical Research Centre of Finland, 2004, 373-376
Skup
8th World Conference on Timber Engineering
Mjesto i datum
Lahti, Finska, 14.06.2004. - 17.06.2004
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
glulam timber; perpendicular stresses; CFRP plates; FEA modeling
Sažetak
This paper presents the results of an analysis of tests of taking over perpendicular stresses by means of CFRP plates. Parallel with the lab tests, the numerical modelling was carried out by means of COSMOS/M software for lab-tested cases. Based on these analyses, the other numerical analyses were carried out that show the possibility of application of CFRP plates in taking over perpendicular stresses. The paper presents FEM analysis results on a 3D numerical model. The lab tests were conducted at the Laboratory of Technical Mechanics of the Faculty of Civil Engineering, University of Zagreb.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
