Pregled bibliografske jedinice broj: 170543
Direct Torque Control of Induction Motor with Stator Flux Correction
Direct Torque Control of Induction Motor with Stator Flux Correction // Automatika, 44 (2003), 1-2; 41-46 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 170543 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Direct Torque Control of Induction Motor with Stator Flux Correction
Autori
Krušelj, Dubravko ; Bilić, Mario ; Furčić, Boris ; Siladi, Vladimir ; Vučetić, Miroslav
Izvornik
Automatika (0005-1144) 44
(2003), 1-2;
41-46
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Induction motors; estimation techniques; vector control
Sažetak
Direct torque Control (DTC) method with corrections of stator flux vector is presented in the paper. The correction is made by means of appropriate component of stator current vector. Thus, controlled quantities (electromagnetic torque and stator flux) are estimated only from stator parameters and measured stator quantities, and there is no need to use rotor parameters, which are dependent on the operating condition, and rotor quantities, which cannot be measured. With the proposed method stable operation in whole speed range, robust start-up with slow change of the torque and fast torque response are achieved. Simulations and experimental tests verify the validity of the method.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
Citiraj ovu publikaciju:
Uključenost u ostale bibliografske baze podataka::
- Chemical Abstracts
- Current Bibliography on Science and Technology
- INSPEC (Institution of Electrical Engineers)
- Science Abstracts (Referativnii Žurnal)
