Pregled bibliografske jedinice broj: 168582
Experimental and numerical study of the flow and heat transfer in plate heat exchanger channels
Experimental and numerical study of the flow and heat transfer in plate heat exchanger channels // Proceed. of the 10th 2004 Int. Refrigeration and Air Conditioning Conf., Purdue / Groll, Eckhard A. (ur.).
West Lafayette (IN): The Ray W. Herrick Laboratories, School of Mechanical Engineering, 2004. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 168582 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Experimental and numerical study of the flow and heat transfer in plate heat exchanger channels
Autori
Dović, Damir ; Švaić, Srećko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceed. of the 10th 2004 Int. Refrigeration and Air Conditioning Conf., Purdue
/ Groll, Eckhard A. - West Lafayette (IN) : The Ray W. Herrick Laboratories, School of Mechanical Engineering, 2004
Skup
2004 Purdue conferences, 10th 2004 Int. Refrigeration and Air Conditioning Conf
Mjesto i datum
West Lafayette (IN), Sjedinjene Američke Države, 12.07.2004. - 15.07.2004
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
numerička analiza strujanja (CFD); pločasti izmjenjivači topline
(CFD analysis; plate heat exchangers)
Sažetak
This paper presents an experimental and numerical study of the flow and heat transfer in corrugated chevron channels of plate heat exchangers. 3D CFD simulations were performed on two channel models, each consisting of 16 cells, with chevron angles  =28°and  =65° under laminar, transitional and fully turbulent flow conditions. Applied the RNG k- and the RES models for turbulent flow simulation are presented and discussed. Computationally obtained flow patterns are analyzed and compared with recorded ones from the visualization tests. Different methods for evaluation of the simulated hydraulic and thermal characteristics are discussed and compared with experimental data from present measurements and literature.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo