Pregled bibliografske jedinice broj: 168566
In Situ Measurement of the Velocity of Detonation and Comparison of ANFO and Heavy ANFO Explosives Produced at the Point of Use
In Situ Measurement of the Velocity of Detonation and Comparison of ANFO and Heavy ANFO Explosives Produced at the Point of Use // Proceedings of 5th International Carpathian Control Conference / Kot, Andrzej (ur.).
Krakov: Faculty of Mechanical Engineering and Robotics, AGH-UST Krakow, 2004. str. 195-202 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 168566 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
In Situ Measurement of the Velocity of Detonation and Comparison of ANFO and Heavy ANFO Explosives Produced at the Point of Use
Autori
Žganec, Stjepan ; Ester, Zvonimir ; Dobrilović, Mario
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 5th International Carpathian Control Conference
/ Kot, Andrzej - Krakov : Faculty of Mechanical Engineering and Robotics, AGH-UST Krakow, 2004, 195-202
Skup
5th International Carpathian Control Conference - ICCC 2004
Mjesto i datum
Zakopane, Poljska, 25.05.2004. - 28.05.2004
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
VOD measuring; explosives; seismic
Sažetak
This paper describes methods of measuring the velocity of detonation in bore holes loaded with different types of bulk explosive, such as ANFO and heavy ANFO. The explosives are produced at the point of use with mobile equipment. The measurement of the velocity of detonation (VOD) are took place in holes with different diameters. On this basis the interdependence of VOD and bore-hole diameter was determined. The VOD measurements, with different blasting parameters, can be used for the selection of the best explosives to be produced at the site, taking into account the geological characteristics of the blasting rock.
Izvorni jezik
Engleski
Znanstvena područja
Rudarstvo, nafta i geološko inženjerstvo