Naslov
Waveguide Miniaturization Using Uniaxial Negative Permeability Meta-Material

Autori
Hrabar, Silvio ; Bartolić, Juraj ; Šipuš, Zvonimir

Izvornik
IEEE transactions on antennas and propagation (0018-926X) 53 (2005), 1; 110-119

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Backward-wave; meta-materials; waveguide; uniaxial anisotropy; negative permeability

Sažetak
A rectangular waveguide filled with anisotropic uniaxial meta-material with transversal negative effective permeability is investigated both theoretically and experimentally. It is shown that such a waveguide supports propagation of the backward wave below the cut-off frequency, thus, it can be considered as a dual of the ordinary waveguide. The transversal dimension of this waveguide can be arbitrarily smaller than half of a wavelength in the filling material, provided that the transversal permeability is negative. This peculiar behavior may be used for fabrication of miniaturized rectangular waveguides. Several experimental miniaturized waveguides loaded with double ring resonators in 7 GHz frequency band have been designed, fabricated and tested. The measured results revealed backward-wave pass-band located below the cut-off frequency. Furthermore, it was experimentally shown that the increase of the physical length of the waveguide caused the decrease of the electrical length. This is a direct proof of the backward-wave propagation since the phase of the backward wave increases along the waveguide.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika

POVEZANOST RADA