Naslov
Stress Analysis of Spur Loaded Tooth and its Adjacent Teeth

Autori
Marunić, Gordana

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 3rd International Conference UPS 2004 Business Systems Management / Majstorović, V ; Katalinić, B. ; Čović, D. ; Višekruna, V. - Mostar : Beč : Sveučilište u Mostaru ; DAAAM International Vienna ; Austrian Society of Engineers and Architects OEIAV-1848 ; Scientific and Technical Forum of Mostar, 2004, 133-136

Skup
3rd International Conference UPS 2004

Mjesto i datum
Mostar, Bosna i Hercegovina, 23.09.2004. - 24.09.2004

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Spur Gear; Tooth-Root Stress; Rim Thickness; 3D FEM

Sažetak
Based upon the 3D FEM research into standard spur gear stress field and the determined maximum tooth fillet stress for the meshing phase, the stress analysis at the bottom centres of the loaded and adjacent teeth spaces, was performed. The stresses have been separated for characteristic points of single pair tooth contact: the outer, inner and pitch point. The results of the stress analysis primarily indicate the manner a gear rim thickness effects maximum tooth-root stress position and the possibility of tooth-root stress alternation intensification at the tooth bottom centres i.e. tooth fillets.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA