Naslov
Numerical model of tram-track interaction with failures on rail surface

Autori
Lakušić, Stjepan ; Rak, Mladenko ; Lazarević, Damir

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
COMPUTER IN RAILWAYS IX / Allan, J ; Brebbia, C.A. ; Hill, R.J. ; Sciutto, G. ; Sone, S. - Southampton : Boston (MA) : Wessex Institute of Technology Press, 2004, 821-831

Skup
COMPRAIL 2004

Mjesto i datum
Dresden, Njemačka, 17.05.2004. - 19.05.2004

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
tram-track interaction; rail; weld; numerical model; contact force

Sažetak
The paper deals with numerical model of a tram moving on the track. The rail is modelled as elastically supported continuous beam with lumped masses. A vehicle is approximated as a discrete system consisting of three rigid masses connected with linear elastic springs. Dissipation mechanisms in the system are modelled with the linear dashpots. The input parameters are obtained from manufacturer and from measurements in the laboratory and in situ. Two basic assumptions that are used are: a) the Euler-Bernoulli beam theory and b) the separation of the wheel from the rail is not permitted. The system of differential equations of motion is solved by an implicit version of step by step method based on the direct integration technique. The algorithm is conceived on the first order predictor – (re) corrector method. The contact condition is modelled by the force method. Results of the calculations are compared with the results of measurement on the tram track. Numerical predictions for displacements and accelerations are in good agreement with the experimental findings.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo

POVEZANOST RADA