Pregled bibliografske jedinice broj: 158965
The Process of Improving Corrosion Stability of Phosphate Coating with Higher Layer Weight on the Surface of Iron and Steel
The Process of Improving Corrosion Stability of Phosphate Coating with Higher Layer Weight on the Surface of Iron and Steel // Materials and Metallurgy, Summaries of Lectures / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2004. (poster, međunarodna recenzija, sažetak, stručni)
CROSBI ID: 158965 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Process of Improving Corrosion Stability of Phosphate Coating with Higher Layer Weight on the Surface of Iron and Steel
Autori
Tkalčić, D.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, stručni
Izvornik
Materials and Metallurgy, Summaries of Lectures
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2004
Skup
6. Međunarodni simpozij Hrvatskog metalurškog društva, SHMD 2004, Materijali i metalurgija
Mjesto i datum
Šibenik, Hrvatska, 20.06.2004. - 24.06.2004
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
cold deformation; metal; corrosion stability; phosphate coating
Sažetak
The goal of the paper is to ensure, by adding some specific organic matters into the basic phosphate bath, which is used for tube preparation before the cold deformation of metal, change of its features as for creating an increased-weight coating. As the matter of fact, an essential improvement of corrosion stability of coating is achieved by providing a phosphate coating of increased weight. For example, the required weight for hydraulic tubes is > 15 g/m2. An essential increase of mass is registred in coating prepared in phosphate bath with addition of organic acid.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
