Pregled bibliografske jedinice broj: 158225
Adaptive time-step implicit methods for solving contact problems in rotordynamics
Adaptive time-step implicit methods for solving contact problems in rotordynamics // Proceedings of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Bizovac: Hrvatsko društvo za mehaniku (HDM), 2003. str. 593-600 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 158225 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Adaptive time-step implicit methods for solving contact problems in rotordynamics
Autori
Žigulić, Roberto ; Braut, Sanjin ; Skoblar, Ante ; Butković, Mirko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 4th International Congress of Croatian Society of Mechanics
/ Matejiček, Franjo - Bizovac : Hrvatsko društvo za mehaniku (HDM), 2003, 593-600
Skup
4th International Congress of Croatian Society of Mechanics
Mjesto i datum
Bizovac, Hrvatska, 18.09.2003. - 20.09.2003
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
rotordynamics; contact problem; adaptive time step methods
Sažetak
In the paper the determination of transient nonlinear multidisc rotor response, whirling with slip on the vibrating stator, is shown. Nonlinearities are taken in the mathematical model through the normal contact force, as a function of deformation, deformation velocity as well as contact angle, in the contact point. Some results in using HHT alpha, WBZ alpha and generalized alpha method, for numerical obtaining of response of run-down rotor during the contact with vibrating stator in the dry friction bearings, are given. The numerical stability and accuracy of these methods are compared. Special attention is paid to the possibility of using the adaptive time step calculation. For this purpose dif-ferent numerical indicators, which detect the ranges where the time-steps have to be reduced or where they may be enlarged, are compared. Also the criteria for the recalculation with the smaller and larger step size are given.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo