Pregled bibliografske jedinice broj: 155982
Reflektancija i opacitet otisnute podloge
Reflektancija i opacitet otisnute podloge // International Conference MATRIB 2004 : Proceedings / Grilec, Krešimir (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2004. str. 178-184 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 155982 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Reflektancija i opacitet otisnute podloge
(REFLECTANCE AND OPACITY OF THE PRINTED SUBSTRATES)
Autori
Mikac Dadić, Višnja ; Džimbeg-Malčić, Vesna ; Modrić, Damir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
International Conference MATRIB 2004 : Proceedings
/ Grilec, Krešimir - Zagreb : Hrvatsko društvo za materijale i tribologiju (HDMT), 2004, 178-184
Skup
9. savjetovanje o materijalima, tehnologijama, trenju i trošenju = 9. Conference on Materials, Processes, Friction and Wear MATRIB'04
Mjesto i datum
Vela Luka, Hrvatska, 23.06.2004. - 25.06.2004
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
opacitet; reflektancija; otisnute podloge; standarna devijacija
(opacity; reflectance; printed substrates; standard deviation)
Sažetak
In the print quality investigations one of the important optical characteristics is the reflectance and opacity of the printed substrate. In this paper the opacity of the recycled and offset substrates by TAPPI 519 has been measured. The method includes d/00 geometry, standard illuminant C and 20 standard observer. The reflectance of a pad, R∞ , for twenty samples, dimension 1cm × 1cm, and the reflectance, R0, of one paper over black background of the reflectance Rg with the reflectance not higher then 0.5% were recorded and were used to calculate opacity values. Measurements of reflectance were made using X-rite Spectrophotometer, Digital Swatchbook, in the interval of the wavelengths from 410nm to 700nm for every 10nm. These measurements were supported by Color Shop 2.0 software and results were calculated by MathCad 2000 and by Data Analysis and Technical Graphics Origin 6.0. The surfaces of the samples were measured in ten different points and statistics of standard deviation and relative error was applied. The reflectance, the opacity and their standard deviations of both substrates were compared. We discuss these differences caused by differences in the measured substrates.
Izvorni jezik
Hrvatski, engleski
Znanstvena područja
Grafička tehnologija
