Naslov
The amorphization of different cellulose samples by ball milling

Autori
Maier, G. ; Zipper, P. ; Stubičar, Mirko ; Schurz, J.

Izvornik
Cellulose chemistry and technology (0576-9787) 39 (2005), 3-4; 167-177

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
effects of ball milling; kinetics of the decay of crystallinity; cellulose; microcrystalline; pine wood pulp; beech wood pulp; regenerated cellulose fibers; viscose; modal; lyocell; polynosic; wide angle X-ray scattering

Sažetak
Various samples of cellulose I (microcrystalline cellulose, pine wood and beech wood pulp, respectively) and cellulose II (viscose, modal, lyocell and polynosic fibers) were ball milled for 5 to 60 minutes. In order to quantify the degradation of the crystalline structures, caused by milling, wide-angle X-ray scattering studies were performed and the crystallinity of milled samples was determined as a function of milling time. The decay of crystallinity was interpreted in terms of kinetics. While the scattering curves of the various unmilled samples differed considerably in the position and intensity of reflections, the scattering curves of samples milled for a sufficiently long time turned out to be virtually identical, irrespective of the origin and crystal structure of the initial cellulose samples. These scattering curves exhibit only two diffuse maxima and obviously represent the scattering of amorphous cellulose.

Izvorni jezik
Engleski

Znanstvena područja
Kemija

POVEZANOST RADA