Pregled bibliografske jedinice broj: 153687
Influence of Process Parameters on Axial Breaking Force of parts Produced by Selective Laser Sintering Process
Influence of Process Parameters on Axial Breaking Force of parts Produced by Selective Laser Sintering Process // Metalurgija, 43 (2004), 3. (podatak o recenziji nije dostupan, kongresno priopcenje, znanstveni)
CROSBI ID: 153687 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of Process Parameters on Axial Breaking Force of parts Produced by Selective Laser Sintering Process
Autori
Topčić, A. ; Tufekčić, Džemo ; Jurković, Milan ; Zaimović-Uzunović, Nermina
Izvornik
Metalurgija (0543-5846) 43
(2004), 3;
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, kongresno priopcenje, znanstveni
Ključne riječi
Selective Laser Sintering; force; process parameters
Sažetak
One of the most significant process failures of Selective Laser Sintering - SLS is impossibility of full-real load of the produced parts-ptototypes and because of that there is no possibility to make correctly measurements and gain satisfactory results. Influence on process parameters is analysed in this paper (laser power and scan velocity), as well as post processing influence on value of axial breaking force of the parts produced by SLS process using material DM50-V2, on machine EOSIMT M250, producer EOS Munich, Germany.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
0069021
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Milan Jurković
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
