Pregled bibliografske jedinice broj: 152966
Some Tribological Loses Influence on Production Process Squeezing Oil from New Sunflower Hibrids
Some Tribological Loses Influence on Production Process Squeezing Oil from New Sunflower Hibrids // Current Studies of Biotechnology. Volume III : Food / Kniewald, Zlatko (ur.).
Zagreb: Medicinska naklada, 2003. str. 199-208 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 152966 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Some Tribological Loses Influence on Production Process Squeezing Oil from New Sunflower Hibrids
Autori
Marušić, Vlatko ; Krumes, Dragomir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Current Studies of Biotechnology. Volume III : Food
/ Kniewald, Zlatko - Zagreb : Medicinska naklada, 2003, 199-208
ISBN
953-176-209-0
Skup
Scientific Conference Biotechnology and Food
Mjesto i datum
Zagreb, Hrvatska, 19.02.2003. - 22.02.2003
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
tribological losses; oilseed processing; sunflower hybrids
Sažetak
In the research scope of possibilities of parts operating life elongation by the record the state of screw oil presses, the estimation of tribological losses in proccesing the oil from sunflowers was carried out by maintenance service insight and by analizing the elements of tribosystem. Parts of presses and knifes mill cake from the press made with different wear protection procedures, sunflower seeds, grist along the worm-screw and the final cake were embraced by labaratory research. It was determined that there is a possibility of reducing not only the expences but the losses which are consequence of friction and wear conditions in tribosystems of screw presses - in those used for prepressing and likewise in those used for finishing pressing. Conclusion, made on analysis of gathered information, was that there is a need for procedure in terms of adjusting the producing procedure of processing the oil from sunflowers, because of change in technical-technological characteristics of new selections.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo