Pregled bibliografske jedinice broj: 14813
The Calibration System of Surface Roughness Measurement
The Calibration System of Surface Roughness Measurement // Proceedings of the 6thI MEKO Symposium Metrology for Quality Control in Production / Osanna, P.H. ; Prostrednik, D. ; Durakbasa, N.M. (ur.).
Beč: TU Wien Academic Press, 1998. str. 415-419 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 14813 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Calibration System of Surface Roughness Measurement
Autori
Mahović, Sanjin ; Runje, Biserka
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 6thI MEKO Symposium Metrology for Quality Control in Production
/ Osanna, P.H. ; Prostrednik, D. ; Durakbasa, N.M. - Beč : TU Wien Academic Press, 1998, 415-419
Skup
6thI MEKO Symposium Metrology for Quality Control in Production
Mjesto i datum
Beč, Austrija, 08.09.1998. - 10.09.1998
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
surface roughness; calibration system; roughness reference standards
Sažetak
Due to the research work and the experience, this paper deals with the traceability for the groove depth d and the surface roughness parameter Ra in measuring the surface roughness. This work defines all the conditions for the traceability of parameters d and Ra from the Reference standards to the user. The suggested calibration system is based on the Set of Roughness reference staandards LFSB of top measuring prroperties developed and realised in co-operation between the Laboratory at the Faculty of Mechanical Engineering and Naval Architecture and the Factory of Semi-conductors RIZ-Zagreb
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
