Naslov
Hardness measurement in weld joints of high strength steels by contur and tangential method

Autori
Samardžić, Ivan ; Dunđer, Marko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
5th International Scientific Conference on Production Engineering (CIM`99) "Computer Integrated Manufacturing and High Speed Machining" : proceedings / Cebalo, R ; Schulz, H. - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 1999, IV-131

Skup
International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (5 ; 1999)

Mjesto i datum
Opatija, Hrvatska, 17.06.1999. - 18.06.1999

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
hardness; weld joint; high strength steel; contur and tangential method

Sažetak
Considering importance of hardness values in weld joints of high strength steels (HSS), authors use experimentally obtained data describes possibilities which come out from application of contour and tangential method of hardness measurement in weld joints e.g. HSS. Importance of these approaches to hardness measurement is great because hardness is one of the most important characteristics of steel weldability. This testing is simple to perform and they are cheaper compering with other mechanical properties testing at weld joints. So, if value of hardness is not satisfying it could be sign that something should be changed to obtain quality weld joint without some other very expensive investigations.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA