Pregled bibliografske jedinice broj: 143085
Quality Assurance in Digital Printing
Quality Assurance in Digital Printing // Color & textiles (AIC Color 2002 SI) : proceedings / Golob, Vera ; Jeler, Slava ; Stjepanovič, Zoran (ur.).
Maribor: Društvo koloristov Slovenije ; Fakulteta za strojništvo, Oddelek za tekstilstvo, 2002. str. 327-332 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 143085 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Quality Assurance in Digital Printing
Autori
Parac-Osterman, Đurđica ; Joanelli, Martina
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Color & textiles (AIC Color 2002 SI) : proceedings
/ Golob, Vera ; Jeler, Slava ; Stjepanovič, Zoran - Maribor : Društvo koloristov Slovenije ; Fakulteta za strojništvo, Oddelek za tekstilstvo, 2002, 327-332
Skup
Color & Textiles
Mjesto i datum
Maribor, Slovenija, 29.08.2002. - 31.08.2002
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
digitalni tisak; RGB; CMY; gubitak informacija
(digital printing; RGB; CMY; loss of information)
Sažetak
In the beginning of its developement, digital printing could only be used for printing onto a paper substrate. Due to its ecological suitability, lately has been an increased interest in application of digital printing technologies to textile substrate. However, there are still many problems to be solved and one of the most important problem is lack of communication between design/coloration operations and print/production processes. One of essential problem is the loss of colour information, which happens during a process of transformation of the RGB system (input device – aditive colour mixing) into CMY system (output device – subtractive colour mixing). Analisys in this paper were carried out with aim of pointing out the importance of lightness value as one of the parameter of colour management that indicates the problem of loss of information. Printed samples of three hue groups were tested: H* 080 – 100 (yellow), H* 260 – 280 (blue) and H* 000 – 010 and 350 – 360 (red). Results obtained, presented in a CIELab terms through dE/Y and dE/L* relationships, showed that problem can be expected in area of yellow hues due to a selectivity problem that occures with increasing of lightness value. Importance of Y tristimulus value that uniquely defines lightness of one coloured surface, was also confirmed.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija