Pregled bibliografske jedinice broj: 142298
SEM and EDX Analysis of AlMg3 Alloy
SEM and EDX Analysis of AlMg3 Alloy // ALUMINIUM 2003, III. mezinárodní konference
Košice, 2003. str. 49-54 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 142298 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
SEM and EDX Analysis of AlMg3 Alloy
Autori
Gojić, Mirko ; Kosec, Ladislav ; Škraba, Polona
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
ALUMINIUM 2003, III. mezinárodní konference
/ - Košice, 2003, 49-54
Skup
ALUMINIUM 2003, III. mezinárodní konference
Mjesto i datum
Košice, Slovačka, 08.10.2003. - 10.10.2003
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
aluminium; AlMg3 alloy; welding; microstructure; SEM analysis; porosity
Sažetak
The paper describes experimental results of microstructural investigation of AlMg3 alloy before and after welding by TIG technique. Microstructure of base metal contained from 74.8%Al-17.3%Fe-4.9%Mn-1.8%Mg-1.2%Si as well as 97.3% Al and 2.7% Mg phases. Using SEM and EDX analysis was found that (Fe, Ti, Cr) C and copper sulphide particles as well as poosity are presented into weld metalat grain boundaries. Also the gas hole into weld metal was observed.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
