Pregled bibliografske jedinice broj: 142122
Analysis of abrasive wear resistance of protective layers obtained by annealing, chemical and PVD procedures
Analysis of abrasive wear resistance of protective layers obtained by annealing, chemical and PVD procedures // Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 289-290 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 142122 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of abrasive wear resistance of protective layers obtained by annealing, chemical and PVD procedures
Autori
Marušić, Vlatko ; Krumes, Dragomir ; Budić, Ivan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium
/ Katalinić, Branko - Beč : DAAAM International Vienna, 2001, 289-290
Skup
Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium
Mjesto i datum
Beč, Austrija, 24.10.2001. - 27.10.2001
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
analysis; abrasion; wear resistance; protective layers
Sažetak
Applying two test methods: I– Laboratory according to ASTM G 65 (1994) (abrasive standard sand OTTAVA 50/70) and II – Testing in Service on components of worm press during oil extraction from sunflower seeds (abrasive SiO2xnHsO connected to opal silicate). Analyse of abrasive wear resistance on case hardened, boronized protective layers, duplex vanadized layers and by PVD procedure applied CrN and SiC+DLC protective layers. It has been established that wear resistance does not depend on surface hardness or layer depth but on quality of sub-layer stratum and sort and level of contact pressure to abrasion exposed surfaces.
Izvorni jezik
Engleski
