Naslov
Reduced Stress Concentration Factors for Orthrotropic Strips Loaded in Tension, Compression and Bending

Autori
Alfirević, Ivo ; Vnučec, Zdravko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Selected contributions to the 15th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Boer - Beč : ÖIAZ- Österreichische Ingenieur und Architekten-Zeitschrift, 1999, 23-33

Skup
Danubia-Adria Symposium on Experimental Methods in Solid Mechanics (15 ; 1998)

Mjesto i datum
Bertinoro, Italija, 30.09.1998. - 03.10.1998

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
orthotropic composite materials; failure criteria; stress concentration factors

Sažetak
Stress distribution about central elliptical holes in orthotropic plane strips was determined both experimentally by birefringent coatings and numerically using FEM. The strips were loaded in tension, compression and pure bending. The fracture criteria for orthotropic materials were discussed. In order to predict ultimate load and the position of the initial crack the reduced stress concentration factors were defined. After the photoelastic experiments were completed, the models were loaded in tension. The load was gradually increased until the fracture of the models occurred. The load-elongation diagrams were recorded. The ultimate loads and the positions of the initial cracks were calculated using the reduced stress concentration factors. The predicated results agree fairly well with the measured ones.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA