Naslov
Long-Term Hydraulic-Fracture Conductivities Under Extreme Conditions

Autori
Čikeš, Marin

Izvornik
SPE Production & Facilities (1064-668X) 15 (2000), 4; 255-261

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Hydraulic Fracture; Proppant; Conductivity; Pressure-Transient; Analysis

Sažetak
Proppants for hydraulic fracturing are subjected to very severe conditions of stress, temperature and chemical environment while they are expected to maintain their structural integrity for a period of many years. The performance of these proppants over time at simulated in-situ conditions has been a topic of laboratory investigation for several years, but in many cases the real conditions exceed the capabilities of the laboratory apparatus. To determine the proppant behavior under real reservoir conditions, production history and pressure buildup tests of four fractured wells have been analyzed. The reservoir conditions of these wells are so severe, that it was almost impossible to simulate them in laboratory. The formation temperature is 179 to 195 &#61616 ; C (354 to 383 &#61616 ; F), while the reservoir pressure varies between 44.5 and 50.0 MPa (6453 to 7250 psi). The producing fluid is large gravity sour gas, while the producing water is practically deionized. The proppants are mainly high strength zirconium oxide and sintered bauxite that injected amount varies between 164 and 628 tons (3.6E+05 to 1.38E+06 lbm). During the production time of six to eight years, the effective closure stress reached the values in the range of 32 to 51 MPa (4640 to 7395 psi).

Izvorni jezik
Engleski

Znanstvena područja
Rudarstvo, nafta i geološko inženjerstvo

POVEZANOST RADA