Pregled bibliografske jedinice broj: 13648
Cold worked Al thin strips and change of mechanical properties depending on annealing
Cold worked Al thin strips and change of mechanical properties depending on annealing // Metalurgija, 36 (1997), 1; 21-24 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 13648 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Cold worked Al thin strips and change of mechanical properties depending on annealing
Autori
Berović, Aljoša ; Bralić, Denis ; Golja, Marijan ; Jakšić, Drago
Izvornik
Metalurgija (0543-5846) 36
(1997), 1;
21-24
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
cold rolling ; Al thin strips ; mechanical porperties ; annealing
Sažetak
In this work cold deformation of Al-thin-strips and change of mechanical properties depending on the temperature and the time of annealing are described. Cold worked strips al 99.5%, with thickness 0.1mm and 0.05mm were annealing from 170c to 300C during 24 hours, and values of mechanical properties such as tensile strength, elongation, deep drawing by Ericksen and microstructure grain size were measured. It was found that the time of annealing has the greatest influence on mechanical properties at 230C, and completely soft state for all thickness of strips were attained at 260C during 2 hours.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- CA Search (Chemical Abstracts)
- Materials Science Citation Index
- Research Alert
- Metal Abstract
- Referativny Zhurnal
