Pregled bibliografske jedinice broj: 13632
Trajectory Tracking with SMC Technique under Load Disturbance: Experimental Results
Trajectory Tracking with SMC Technique under Load Disturbance: Experimental Results // Proceedings of the 8^th International Power Electronics and Motion Control Conference PEMC'98 / Cerovsky, Z. ; Janousek, J. ; Caha, Z. (ur.).
Prag, Češka Republika: Chech Technical University, Prague, 1998. str. 51-55 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 13632 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Trajectory Tracking with SMC Technique under Load Disturbance: Experimental Results
Autori
Kolonić, Fetah ; Slutej, Alojz ; Gadže, Davor
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 8^th International Power Electronics and Motion Control Conference PEMC'98
/ Cerovsky, Z. ; Janousek, J. ; Caha, Z. - : Chech Technical University, Prague, 1998, 51-55
Skup
8^th International Power Electronics and Motion Control Conference PEMC'98
Mjesto i datum
Prag, Češka Republika, 08.09.1998. - 10.09.1998
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
sliding mode; tracking systems; trajectory
Sažetak
This paper deals with the application of a sliding mode control (SMC) in tracking systems with trajectory generation. The possibilities of using this kind of VSS strategy on tracking control with reference trajectory generation under load disturbance and variable inertia is tested. The practical design of such robust sliding mode controller is discussed. Control law is obtained by using the methodology of balance condition. In order to achieve a tracking with quaranteed precision, smoothing of control function in constant and variable boundary layer are compared. Laboratory setup for experimental verification is realised. It consists of host system (based on MC 68332) and two mechanically coupled synchronous motor permanent magnet (SMPM), where one motor is load for another one. Economical loading is used, connecting the DC Busbars of both converters together so only a minimum energy for losses are consummated.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb