Pregled bibliografske jedinice broj: 13519
Inertial forces at deformation site by rolling in modern high-speed finishing mill stands
Inertial forces at deformation site by rolling in modern high-speed finishing mill stands // Metalurgija, 36 (1997), 4; 235-238 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 13519 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Inertial forces at deformation site by rolling in modern high-speed finishing mill stands
Autori
Binkevič, Evgenij Vasiljevič ; Gorbanev, Arkady Alekseevič ; Mamuzić, Ilija ; Medvedeva, Larisa Vitalievna ; Shynkarenko, Vladyslav Borisovič
Izvornik
Metalurgija (0543-5846) 36
(1997), 4;
235-238
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
finishing mill stands ; deformation site ; rolling ; inertial forces
Sažetak
Calculated data on metal acceleration at the deformation site and required inertial forces are presented. The values of inertial forces are plotted as functions of rolling rate, elongation, and diameter of rod. The necessity of taking into account inertial forces when analysing parameters of rolling in finishing stands of high-speed mills is shown, especially when tension in rod between stands is present.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
Uključenost u ostale bibliografske baze podataka::
- CA Search (Chemical Abstracts)
- Materials Science Citation Index
- Research Alert
- Metal Abstract
- Referativny Zhurnal
