Pregled bibliografske jedinice broj: 132216
Wear and damage analysis of condenser cooling tubes of the steam turbine 210 mw te plomin 2
Wear and damage analysis of condenser cooling tubes of the steam turbine 210 mw te plomin 2 // MATRIB 2003 / Grilec, Krešimir (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2003. str. 333-343 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)
CROSBI ID: 132216 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Wear and damage analysis of condenser cooling tubes of the steam turbine 210 mw te plomin 2
Autori
Staniša, Branko ; Schauperl, Zdravko ; Grilec, Krešimir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo
Izvornik
MATRIB 2003
/ Grilec, Krešimir - Zagreb : Hrvatsko društvo za materijale i tribologiju (HDMT), 2003, 333-343
Skup
MATRIB 2003
Mjesto i datum
Vela Luka, Hrvatska, 26.06.2003. - 28.06.2003
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
steam condenser; cooling tubes; seawater; corrosion wear
Sažetak
The cooling of the steam condenser of the turbine 210 MW at the thermal electric power plant (TE) Plomin 2 is performed by means of seawater. During exploitation, after the condenser first started working, the wear and damage of the cooling tubes was relatively fast due to the seawater. The damage resulted in the occurrence of numerous little holes in the cooling tubes and the leakage of the cooling seawater into the steam condenser, thus causing unscheduled downtimes at the TE. This paper presents the results of the analysis of the damages and leakages of the condenser cooling tubes. The results have shown that the leakage of the cooling seawater is the result of the corrosion and corrosion-erosion wear of the cooling tubes. Measures have been presented to reduce the corrosion wear rate and the leakage of the condenser cooling tubes.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
0120027
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Krešimir Grilec
(autor)