Pregled bibliografske jedinice broj: 1269797
Mathematical modeling of technical diagnostics of mechanisms
Mathematical modeling of technical diagnostics of mechanisms // Supplement of the Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 3-4) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2023. str. 495-495 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1269797 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Mathematical modeling of technical diagnostics of mechanisms
Autori
Mamuzić, Ilija ; Shvachych, G. ; Sushko, L.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Supplement of the Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 3-4)
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2023, 495-495
Skup
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy
Mjesto i datum
Zagreb, Hrvatska, 20.04.2023. - 21.04.2023
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
mechanisms ; technical diagnostics ; mathematical modeling
Sažetak
An algorithmic model of diagnostics, which gets complicated or simplified depending on the goals and operating conditions, is proposed to meet this purpose. The following characteristics of the signals were determined by means of a numerical experiment with the help of developed mathematical models: the dependence of the output signal of the measuring transducer on the operation of the gear teeth ; informational signal about the breakage of one tooth ; an information signal about the formation of a shell in a tooth ; information signal about the formation of a crack ; a signal that carries information about the beat of the gear shaft. The conducted experiments showed the effectiveness of the proposed approach.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Napomena
The conference was canceled due the low number of presenters registered for the conference, but the Book of abstracts has been published.