Pregled bibliografske jedinice broj: 1269768
Shrinkage porosity in thin walls of steel castings
Shrinkage porosity in thin walls of steel castings // Supplement of the Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 3-4) / Mamuzić, Ilija (ur.).
Zagreb, 2023. str. 493-493 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1269768 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Shrinkage porosity in thin walls of steel castings
Autori
Usenko, R. V. ; Mamuzić, Ilija ; Mazorchuk, V. F.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Supplement of the Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 3-4)
/ Mamuzić, Ilija - Zagreb, 2023, 493-493
Skup
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy
Mjesto i datum
Zagreb, Hrvatska, 20.04.2023. - 21.04.2023
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
steel castings ; shrinkage porosity ; uneven thickness
Sažetak
The reason for the occurrence of shrinkage porosity in the walls of steel castings with a thickness of 1 ... 5 mm is the uneven thickness of the layer of solidified steel melt on the mold surface. The uneven thickness of this layer is due to the variability of the melt flow rate in a thin wall during mold casting. To prevent the appearance of shrinkage porosity, the casting of the mold should be carried out at high speed and with increased overheating of the poured steel melt.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Napomena
The conference was canceled due the low number of presenters registered for the conference, but the Book of abstracts has been published.
