Pregled bibliografske jedinice broj: 1269189
An Analysis of Potential Uses, Limitations and Barriers to Implementation of 3D Scan Data for Construction Management-Related Use—Are the Industry and the Technical Solutions Mature Enough for Adoption?
An Analysis of Potential Uses, Limitations and Barriers to Implementation of 3D Scan Data for Construction Management-Related Use—Are the Industry and the Technical Solutions Mature Enough for Adoption? // Buildings, 13 (2023), 5; 1-22 doi:10.3390/buildings13051184 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1269189 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
An Analysis of Potential Uses, Limitations and Barriers to Implementation of 3D Scan Data for Construction Management-Related Use—Are the Industry and the Technical Solutions Mature Enough for Adoption?
Autori
Mihić, Matej ; Sigmund, Zvonko ; Završki, Ivica ; Lovrenčić Butković, Lana
Izvornik
Buildings (2075-5309) 13
(2023), 5;
1-22
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
3D scan data ; qualitative analysis ; photogrammetry ; laser scanning ; UAV ; progress monitoring ; quality control
Sažetak
The potential uses of 3D scan data in the construction industry have been extensively researched in the last 20 years, with many benefits over traditional methods proclaimed by researchers. However, despite their advocated benefits, their implementation in actual construction sites remains low. This research aims to discover the potential uses of 3D scan data for construction management purposes and the limitations and barriers to their implementation and widespread adoption. Previous research into the topic was analysed to discover what technologies were used for generating 3D scan data, for what purpose and what issues were identified. These discoveries were then used to specify the potential uses of 3D scan data for, primarily, progress monitoring and quality control, which were then cross-referenced with all known limitations and barriers from the literature and the researchers’ own experience. Research has shown that, currently, there are numerous issues with both the capabilities of current technical solutions and with the construction industry’s readiness, which hinder mass adoption. Potential for breakthroughs, fortunately, does exist ; however, greater impetus from the construction industry is needed to drive forward the demand for better technical solutions, which would resolve current issues and lead to the widespread adoption of 3D scan data for construction management-related uses.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Ustanove:
Građevinski fakultet, Zagreb
Profili:
Ivica Završki
(autor)
Matej Mihić
(autor)
Lana Lovrenčić-Butković
(autor)
Zvonko Sigmund
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- Social Science Citation Index (SSCI)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus