Pregled bibliografske jedinice broj: 1262218
Usability of Discarded Lignocellulosic Fibers in Paper for Secondary Green Packaging and Labeling
Usability of Discarded Lignocellulosic Fibers in Paper for Secondary Green Packaging and Labeling // Sustainability, 15 (2023), 6; 5378, 15 doi:10.3390/su15065378 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1262218 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Usability of Discarded Lignocellulosic Fibers in Paper for
Secondary Green Packaging and Labeling
Autori
Bates, Irena ; Plazonić, Ivana ; Radić Seleš, Valentina ; Petric Maretić, Katja ; Rudolf, Maja
Izvornik
Sustainability (2071-1050) 15
(2023), 6;
5378, 15
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
label ; lignocellulosic fibers ; printed paper ; secondary packaging ; straw ; usability
Sažetak
Packaging and labels are used for a variety of products and have become an indispensable part of daily life, while products without labels or packaging cause uncertainty among consumers. The global trend is to reduce the amount of packaging waste by recycling and reusing the same material or using other available waste raw materials. With large quantities of stalks remaining discarded in the fields after harvest each year, cereal straw is emerging as an alternative source of lignocellulosic fibers for secondary green packaging and labels. In this study, the usability of printed papers with discarded lignocellulosic fibers by offset and gravure printing processes for secondary green packaging and labels was observed based on the qualitative parameters of reproduction and ink penetration into the printing substrate. From the obtained results, it can be concluded that gravure prints have greater penetration of the ink into the printing substrate, resulting in more uneven surface coverage with printing ink, compared to offset prints, where the viscosity of the ink and the printing process itself have the greatest influence. Therefore, these substrates with discarded lignocellulosic fibers can be used for secondary green packaging and labeling printed by the offset printing process, while gravure printing requires an additional coating or a larger amount of filler in the paper structure.
Izvorni jezik
Engleski
Znanstvena područja
Grafička tehnologija
POVEZANOST RADA
Projekti:
UIP-2017-05-2573 - Otiskivanje, kvaliteta i uporabljivost podloga s ne-drvnim vlakancima (NWF prints quality) (BATES, IRENA, HRZZ - 2017-05) ( CroRIS)
Ustanove:
Grafički fakultet, Zagreb
Profili:
Valentina Radić Seleš
(autor)
Irena Bates
(autor)
Ivana Plazonić
(autor)
Katja Petric Maretić
(autor)
Maja Rudolf
(autor)
Poveznice na cjeloviti tekst rada:
Pristup cjelovitom tekstu rada doi www.mdpi.comPoveznice na istraživačke podatke:
doi.orgCitiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- Social Science Citation Index (SSCI)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus