Naslov
Application of characterisation methods in the development of biomedical titanium alloys

Autori
Jajčinović Magdalena ; Slokar Benić, Ljerka ; Pezer, Robert ; Holjevac Grgurić, Tamara

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Machines. Tehnologies. Materials 2023. Proccedings, Volume I, Machines. Materials / Popov, Georgi - Sofija : Scientific technical union of mechanical engineering Industry - 4.0, 2023, 39-42

Skup
XX Jubilee International Congress “Machinеs.Technolоgies.Materials”

Mjesto i datum
Borovec, Bugarska, 08.03.2023. - 11.03.2023

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
biomedical alloys, Ti-alloys, characterisation, properties

Sažetak
Biomaterials are becoming an increasingly important research topic over time as they are used to replace parts and functions of the human body, helping to improve the quality of human life. Titanium alloys are particularly important for the development of new biomaterials. Commercial pure titanium and its alloys are used as essential structural biomaterials in the manufacture of implants due to their excellent biocompatibility, good corrosion resistance and mechanical strength. However, studies have shown that aluminum and vanadium ions are released in alloys such as Ti-6Al-4V, which can cause health problems over time. Because of the problems that occur, researchers are working to improve the properties of titanium alloys by adding new elements. In most cases, different metals are added to titanium and it is known that with the presence of different metals, the properties of titanium also change. All biomedical titanium alloys must undergo various testing procedures before they can be used. The article describes the characterisation methods used in the development of titanium alloys, such as: light and scanning electron microscopy, energy-dispersive spectrometry, X-ray diffraction analysis, differential scanning calorimetry, differential thermal analysis. The reliability of the results depends on the methods used and the avoidance of errors in the characterisation of biomedical alloys in order to reach better conclusions and produce alloys of the highest quality desirable for use in the human body.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

POVEZANOST RADA