Pregled bibliografske jedinice broj: 1258290
The Improvement of Socks Dimensional Stability Assessment Methodology
The Improvement of Socks Dimensional Stability Assessment Methodology // Proceedings of 2nd International Conference on Knowledge-Based Textiles (ICKT 2023) / Nawab, Y. ; Hussain, M. ; Ahmad, F. ; Rubab Batool, S. ; Razzaq, S. (ur.).
Faisalabad, Pakistan: National Textile University, Faisalabad, 2023. 22, 1 (predavanje, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1258290 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Improvement of Socks Dimensional Stability
Assessment Methodology
Autori
Živičnjak, Juro ; Tomljenović, Antoneta
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Proceedings of 2nd International Conference on Knowledge-Based Textiles (ICKT 2023)
/ Nawab, Y. ; Hussain, M. ; Ahmad, F. ; Rubab Batool, S. ; Razzaq, S. - Faisalabad, Pakistan : National Textile University, Faisalabad, 2023
ISBN
978-969-7549-14-6
Skup
2nd International Conference on Knowledge-Based Textiles (ICKT 2023)
Mjesto i datum
Online ; Faisalabad, Pakistan, 14.02.2023. - 15.03.2023
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
socks, dimensional stability, textile testing
Sažetak
Socks are knitted garment articles that cover the feet, ankles and part of the legs calf. They have to retain the usage quality, especially dimensional stability after repeated washing and drying cycles, since their appropriate size and extensible knitted structure ensures improved fit. Studies concerning sock dimensional stability are very few. Since here is not any European standardised procedure intended for sock dimensional stability determination, the standards EN ISO 3759 and EN ISO 5077 were applied. According to the proposed methodology, the changes in socks length and width dimensions were determined by measuring of precisely defined distances in the foot and the leg parts of dray relaxed, and wet relaxed socks after five repeated washing and drying cycles (performed according to the EN ISO 6330). Additionally, fixed load method performed with PC controlled strength tester and specially adapted clamps was used to determine the changes in the socks elongation, for both lengthwise and widthwise directions. In this paper three groups of calf length cotton socks, made in the highest percent of single ring spun yarns in full plating by textured polyamide 6.6 yarns of different linear density were tested. The influence of different yarn combinations in socks, produced under the same conditions, and their physical properties on the obtained results were evaluated. The proposed methodology provided vital information in observed dimensional and elongation changes, which indicate that despite the shrinkage after the simulation of domestic care, the socks will extend more on the wearer feet.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
HRZZ-IP-2016-06-5278 - Udobnost i antimikrobna svojstva tekstila i obuće (ComforMicrobTexFoot) (Skenderi, Zenun, HRZZ - 2016-06) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb