Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1258192

Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase


Cvok, Ivan; Deur, Joško; Hihlik, Mislav; Zhang, Yijing; Ivanovic, Vladimir; Fujii, Yuji
Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase // Vehicles, 5 (2023), 1; 177-202 doi:10.3390/vehicles5010011 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 1258192 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase

Autori
Cvok, Ivan ; Deur, Joško ; Hihlik, Mislav ; Zhang, Yijing ; Ivanovic, Vladimir ; Fujii, Yuji

Izvornik
Vehicles (2624-8921) 5 (2023), 1; 177-202

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
automotive systems ; automatic transmission ; shift control ; optimization ; optimal control ; analysis

Sažetak
Step-ratio automatic transmission upshift performance can be improved by modulating the off- going (OFG) clutch during the inertia phase. In this paper, a static powertrain performance model is derived and applied for the purpose of numerically efficient, multi-objective shift control parameter optimization for the inertia phase. The optimization is aimed at finding the optimal node parameters for simplified, piecewise linear, open-loop profiles of oncoming (ONC) clutch, OFG clutch, and engine torque reduction control variables. The performance indices, i.e., the optimization objectives, include shift comfort, clutch thermal loss, and shift time. The optimization results in 3D Pareto optimal frontiers, which are then analyzed and compared with those obtained by using the previously developed, nonlinear model-based, genetic algorithm optimization tool. The derived method is employed in order to develop a static model-based predictive control (S-MPC) strategy, which commands ONC clutch torque control input while retaining open-loop controls for engine and OFG clutch control inputs. The S-MPC strategy aims at providing the prespecified shift time, while the shift time accuracy is relaxed to some extent by using a control input dead zone element to avoid chattering effect. The S-MPC system performance is verified through simulation and compared with the genetic algorithm benchmark. The simulation results demonstrate that the S-MPC strategy approaches the benchmark performance.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Ivan Cvok (autor)

Avatar Url Mislav Hihlik (autor)

Avatar Url Vladimir Ivanović (autor)

Avatar Url Joško Deur (autor)

Poveznice na cjeloviti tekst rada:

doi doi.org www.mdpi.com

Citiraj ovu publikaciju:

Cvok, Ivan; Deur, Joško; Hihlik, Mislav; Zhang, Yijing; Ivanovic, Vladimir; Fujii, Yuji
Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase // Vehicles, 5 (2023), 1; 177-202 doi:10.3390/vehicles5010011 (međunarodna recenzija, članak, znanstveni)
Cvok, I., Deur, J., Hihlik, M., Zhang, Y., Ivanovic, V. & Fujii, Y. (2023) Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase. Vehicles, 5 (1), 177-202 doi:10.3390/vehicles5010011.
@article{article, author = {Cvok, Ivan and Deur, Jo\v{s}ko and Hihlik, Mislav and Zhang, Yijing and Ivanovic, Vladimir and Fujii, Yuji}, year = {2023}, pages = {177-202}, DOI = {10.3390/vehicles5010011}, keywords = {automotive systems, automatic transmission, shift control, optimization, optimal control, analysis}, journal = {Vehicles}, doi = {10.3390/vehicles5010011}, volume = {5}, number = {1}, issn = {2624-8921}, title = {Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase}, keyword = {automotive systems, automatic transmission, shift control, optimization, optimal control, analysis} }
@article{article, author = {Cvok, Ivan and Deur, Jo\v{s}ko and Hihlik, Mislav and Zhang, Yijing and Ivanovic, Vladimir and Fujii, Yuji}, year = {2023}, pages = {177-202}, DOI = {10.3390/vehicles5010011}, keywords = {automotive systems, automatic transmission, shift control, optimization, optimal control, analysis}, journal = {Vehicles}, doi = {10.3390/vehicles5010011}, volume = {5}, number = {1}, issn = {2624-8921}, title = {Static Model-Based Optimization and Multi-Input Optimal Control of Automatic Transmission Upshift during Inertia Phase}, keyword = {automotive systems, automatic transmission, shift control, optimization, optimal control, analysis} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Emerging Sources Citation Index (ESCI)


Citati:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font