Pregled bibliografske jedinice broj: 1257453
STRENGTH AND STIFFNESS OF T-SHAPED MORTISE AND STUB TENON JOINTS
STRENGTH AND STIFFNESS OF T-SHAPED MORTISE AND STUB TENON JOINTS // 15th International Scientific Conference WoodEMA 2022 - Crisis Management and Safety Foresight in Forest-Based Sector and SMES Operating in the Global Environment / Nováková, Renata (ur.).
Trnava: International Association for Economics, Management, Marketing, Quality and Huma Resources in Forestry and Forest Based Industry - WoodEMA, i.a., 2022. str. 111-117 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1257453 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
STRENGTH AND STIFFNESS OF T-SHAPED MORTISE AND STUB
TENON JOINTS
Autori
Hajdarevic, Seid ; Obucina, Murco ; Ibrisevic, Alen ; Busuladzic, Ibrahim
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
15th International Scientific Conference WoodEMA 2022 - Crisis Management and Safety Foresight in Forest-Based Sector and SMES Operating in the Global Environment
/ Nováková, Renata - Trnava : International Association for Economics, Management, Marketing, Quality and Huma Resources in Forestry and Forest Based Industry - WoodEMA, i.a., 2022, 111-117
ISBN
978-953844600-9
Skup
CRISIS MANAGEMENT AND SAFETY FORESIGHT IN FOREST- BASED SECTOR AND SMES OPERATING IN THE GLOBAL ENVIRONMENT
Mjesto i datum
Trnava, Slovačka, 08.06.2022. - 10.06.2022
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
stiffness ; strength ; stub tenon ; wood joint
Sažetak
This paper investigated the strength and stiffness of T-shaped mortise and tenon joints with stub tenon. PVAc glue was utilized to assemble the beechwood joints with an interference fit. The strength was carried out by measuring the maximal applied load and calculating the ultimate bending moment. Stiffness evaluation was conducted by measuring displacement and calculating the ratio of applied force and displacement along the force line as the ratio of bending moment and rotation angle of the joint. The results were compared with the results of typical mortise and tenon joints. The results showed the effect of different widths of the stub tenon on the strength and stiffness of T-shaped joints. Also, significant differences were revealed between the strength and stiffness of T-joints about different nonsymmetric positions of stub tenons, tenon shoulders, and directions of the force. The investigation showed that the intensity of mechanical properties of nonsymmetric joints is dependent on stub tenon position and load modes.
Izvorni jezik
Engleski
