Pregled bibliografske jedinice broj: 1251309
Sizing of Supercapacitor-based Energy Storage System for Elevator Applications
Sizing of Supercapacitor-based Energy Storage System for Elevator Applications // Proceedings of 1st IEEE Industrial Electronics Society Annual On-Line Conference (ONCON 2022)
online, 2022. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1251309 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Sizing of Supercapacitor-based Energy Storage
System for Elevator Applications
Autori
Godec, Damjan ; Pravica, Luka ; Kutija, Martina ; Makar, Martin
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 1st IEEE Industrial Electronics Society Annual On-Line Conference (ONCON 2022)
/ - , 2022, 1-6
Skup
1st IEEE Industrial Electronics Society Annual On-line Conference (ONCON 2022)
Mjesto i datum
Online, 09.12.2022. - 11.12.2022
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
elevators ; energy storage ; energy savings ; supercapacitors ; passenger distribution
Sažetak
Energy storage systems based on supercapacitors have become attractive solutions for improving elevator efficiency. Electrical energy is stored while the elevator drive is running in generator mode and used when needed. The energy storage system can also be charged in standby mode and used to reduce power peaks during start-up. Therefore, the energy storage system should be appropriately sized, which is not trivial since elevator usage is stochastic in nature. In this paper, the effect of energy storage system size on the efficiency of regenerative energy reuse is analyzed based on a measurement study. Measurements were performed for one week on faculty elevators under real conditions. The data obtained from the measurements were analyzed, and the results of the analysis of energy consumption, elevator starts, and potential energy savings were presented for all three elevators and the group. The elevator energy storage system was emulated in MATLAB with and without energy consumption balancing which is used to reduce peak power. The efficiency of regenerative energy reuse is calculated for a wide range of energy storage sizes, both with and without energy consumption balancing, for all individual elevators and the group.
Izvorni jezik
Engleski
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb