Naslov
Analysis of the technological efficiency of temperature stabilization of shell ceramic molds before pouring

Autori
Selivorstov, V. ; Shakirov, O. ; Mamuzić, Ilija

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 2) / Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2023, 325-325

Skup
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy

Mjesto i datum
Zagreb, Hrvatska, 20.04.2023. - 21.04.2023

Vrsta sudjelovanja
Pozvano predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
temperature stabilization ; shell ceramic molds

Sažetak
The analysis of the data characterizing the effect of the molding method on the cooling of ceramic molds after tempering showed that the longest stability of the mold temperature is observed with the methods of molding ceramic molds into a granular support filler and a thermostat. Moreover, by changing the thickness or material of the heatinsulating layer of the thermostat, it is possible to adjust the duration of thermostating of the ceramic mold within wide limits, and thereby control the processes of casting formation and its quality. It has been established that during molding in a thermostat, the sufficient duration of calcination of ceramic shells at 950...980 0C is about 1 hour.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

POVEZANOST RADA