Pregled bibliografske jedinice broj: 1242388
Sintering of agglomerate during separate preparation of the charge
Sintering of agglomerate during separate preparation of the charge // Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 2) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2023. str. 322-322 (predavanje, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1242388 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Sintering of agglomerate during separate preparation of the charge
Autori
Bochka, V. V. ; Yaholnyk, М. V. ; Sova, A. V. ; Mamuzić, Ilija ; Fursov, M. O. ; Malenko, K. I.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 2)
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2023, 322-322
Skup
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy
Mjesto i datum
Zagreb, Hrvatska, 20.04.2023. - 21.04.2023
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
sintering agglomerate ; charge preparation
Sažetak
The paper presents the results of research into a common and separate method of preparing a charge for sintering agglomerate. The best quality of the agglomerate was ensured by separate lumping of the “concentrate-ore-limelimestone” composite, the basicity of which was 0.9-1.0 units, and the residual charge with the basicity of 1.6-1.8 units, after which both composites are mixed in parallel. Then their joint granulation takes place. Fuel is supplied at the end of granulation. Sintering of the agglomerate prepared by the proposed method allows to increase the yield of suitable agglomerate by 10.25 % and to reduce the content of the 0-5 mm fraction after the strength test by 11 %.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
- Scopus