Naslov
Sand-sodium-silicate mixtures steam-microwave structuring technological peculiarities

Autori
Solonenko, L. I. ; Repiakh, S. I. ; Uzlov, K. I. ; Mamuzić, Ilija

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Book of abstracts of the 16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy (published in: Metalurgija 62 (2023) 2) / Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2023, 321-321

Skup
16th International Symposium of Croatian Metallurgical Society - SHMD '2023, Materials and metallurgy

Mjesto i datum
Zagreb, Hrvatska, 20.04.2023. - 21.04.2023

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
steam-microwave structuring ; sand-sodium-silicate mixtures

Sažetak
Steam-microwave structured sand-sodium-silicate mixtures highest technological properties have been obtained under conditions if they are initially in free-flowing state, used sand is mainly fractions of 0, 16 ... 0, 20 mm and, after cladding with sodium silicate solute, sieved through sieve with 0.315 mm mesh. For structuring, water steam should be fed into mixture as water charges. Their location in rigging allows the water steam, released from them, to move in direction from rigging dead-end parts to mixture open surface. Water mass single water charge is 1 ... 3 g of water per 2, 5 kg of mixture. When structuring, do not allow interruption of microwave radiation influence on mixture for more than 20 ... 30 seconds before it ends.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

POVEZANOST RADA