Naslov
Gradeability of a Forwarder Based on Traction Performance

Autori
Bumber, Zoran ; Ðuka, Andreja ; Pandur, Zdravko ; Poršinsky , Tomislav

Izvornik
Forests (1999-4907) 14 (2023), 1; 103, 18

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
forwarders’ centre of gravity ; declared payload ; axle load distribution ; wheel numeric

Sažetak
Based on the knowledge of the dimensional and mass features of a forwarder, a model was developed to assess its mobility during timber forwarding uphill in a safe and eco-efficient way. The model is based on knowledge of the position of the forwarder’s centre of gravity, its declared payload and the length of the loaded timber, as well as the gradeability for uphill timber forwarding based on the traction characteristics of the vehicle. The model connects two research approaches, (1) vehicle–terrain approach (distribution of axle loads depending on the longitudinal terrain slope) and (2) wheel–soil approach (estimation of the traction characteristics of the forwarder based on the wheel numeric), concerning previous research: (i) underload on the front axle of the vehicle, (ii) overload on the rear axle of the vehicle, (iii) permissible tire load, (iv) minimal soil bearing capacity, (v) wheel slip. Simulation modelling for the assessment of the forwarders’ mobility range during timber forwarding uphill was conducted on an example of an eight-wheel Komatsu 875 forwarder, with a declared payload of 16, 000 kg, equipped with 710/45-26.5 tires, for which the position of the centre of gravity was determined by the method of lifting the axle. The results of the distribution of the adhesion load on the front and rear axles of the forwarder indicated that, during timber forwarding of 16, 000 kg and 4.82 m long hardwood logs on a terrain slope below 68%, there is no critical unloading on the front bogie axle, nor overloading on the rear bogie axle, i.e., wheel tire overload that could limit forwarder mobility. For the specified range of longitudinal terrain slope, a minimal cone index of 950 kPa for an exemplary forwarder is an environmental factor and was calculated based on the nominal ground pressure of the reference (heavier loaded) rear wheels of the vehicle. The forwarders’ mobility range was determined by the intersection curves of the gradeability (based on forwarders’ traction characteristics at wheel slip of 25% vs. cone index) and the curve of the minimal soil cone index.

Izvorni jezik
Engleski

Znanstvena područja
Šumarstvo

POVEZANOST RADA